主题 : mini6410从sd卡启动问题 复制链接 | 浏览器收藏 | 打印
级别: 新手上路
UID: 38394
精华: 0
发帖: 13
金钱: 65 两
威望: 13 点
综合积分: 26 分
注册时间: 2011-02-25
最后登录: 2011-03-17
楼主  发表于: 2011-03-11 20:41

 mini6410从sd卡启动问题

我用sd卡一键恢复linux系统是可以执行的,可是把Friendlyarm.ini改成run之后想从sd卡启动linux系统却不行 这是为什么?
级别: 新手上路
UID: 38394
精华: 0
发帖: 13
金钱: 65 两
威望: 13 点
综合积分: 26 分
注册时间: 2011-02-25
最后登录: 2011-03-17
1楼  发表于: 2011-03-11 21:24
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2011-03-11 21:13:35 UTC (1299878015
)
Freeing init memory: 1404K
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will b
e case sensitive!
losetup: /dev/loop0: No such file or directory
bio too big device loop0 (2 > 0)
EXT3-fs (loop0): error: unable to read superblock
mount: mounting /dev/loop0 on /r failed: Invalid argument
mount: mounting /sdcard on /r/sdcard failed: No such file or directory
/init: line 102: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c016d464>] (unwind_backtrace+0x0/0xe4) from [<c04fc7ec>] (panic+0x58/0x174)
[<c04fc7ec>] (panic+0x58/0x174) from [<c0187848>] (do_exit+0x68/0x5cc)
[<c0187848>] (do_exit+0x68/0x5cc) from [<c0188070>] (do_group_exit+0x90/0xc4)
[<c0188070>] (do_group_exit+0x90/0xc4) from [<c01880b4>] (sys_exit_group+0x10/0x
18)
[<c01880b4>] (sys_exit_group+0x10/0x18) from [<c0167e20>] (ret_fast_syscall+0x0/
0x30)
one_wire_status: 2
这是我超级终端的显示,前面的都是正确的,然后就停在one_wire_status:2这里不动了
求救啊~~~~~~~
级别: 新手上路
UID: 69373
精华: 0
发帖: 47
金钱: 235 两
威望: 47 点
综合积分: 94 分
注册时间: 2012-05-05
最后登录: 2017-09-13
2楼  发表于: 2012-05-22 21:04
这个贴一年没人回复。。。。。。