最近一直在编译自己的内核，可是一直跑不起来，特来求助
以下是部分超级终端的信息，一直在重启。
Reading data from 0x57f800 -- 100% complete.
5242880 bytes read: OK
Boot with zImage
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.35.7-FriendlyARM ([url=mailto:root@heejun-desktop]root@heejun-desktop[/url]) (gcc version 4.5.1 (
ctng-1.8.1-FA) ) #1 PREEMPT Thu Mar 17 20:55:15 CST 2011
<0>hello.word-this is page_address_init();
CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: SMDK6410
Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 32768
<7>free_area_init_node: node 0, pgdat c06778dc, node_mem_map c072d000
<7> Normal zone: 256 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 32512 pages, LIFO batch:7
CPU S3C6410 (id 0x36410101)
<7>s3c6410_init_clocks: initialising clocks
<6>S3C24XX Clocks, Copyright 2004 Simtec Electronics
<3>camera: no parent clock specified
<7>s3c6400_setup_clocks: registering clocks
<7>s3c6400_setup_clocks: clkdiv0 = 01043310
<7>s3c6400_setup_clocks: xtal is 12000000
<6>S3C64XX: PLL settings, A=532000000, M=532000000, E=24000000
<6>S3C64XX: HCLK2=266000000, HCLK=133000000, PCLK=66500000
<6>mout_apll: source is fout_apll (1), rate is 532000000
<6>mout_epll: source is epll (1), rate is 24000000
<6>mout_mpll: source is mpll (1), rate is 532000000
<6>mmc_bus: source is mout_epll (0), rate is 24000000
<6>mmc_bus: source is mout_epll (0), rate is 24000000
<6>mmc_bus: source is mout_epll (0), rate is 24000000
<6>usb-bus-host: source is clk_48m (0), rate is 48000000
<7>s3c64xx_clk_doutmpll_get_rate: parent is 532000000
<6>uclk1: source is dout_mpll (1), rate is 66500000
<6>spi-bus: source is mout_epll (0), rate is 24000000
<6>spi-bus: source is mout_epll (0), rate is 24000000
<6>audio-bus: source is mout_epll (0), rate is 24000000
<6>audio-bus: source is mout_epll (0), rate is 24000000
<6>audio-bus: source is mout_epll (0), rate is 24000000
<6>irda-bus: source is mout_epll (0), rate is 24000000
<3>camera: no parent clock specified
<0>hello.word-this is setup_arch();
<0>hello.word-this is mm_init_owner();
<0>hello.word-this is setup_command_line();
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
<5>Kernel command line: logcat
<6>PID hash table entries: 512 (order: -1, 2048 bytes)
<0>hello.word-this is pidhash_init();
<6>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>Memory: 128MB = 128MB total
<5>Memory: 122580k/122580k available, 8492k reserved, 0K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc8800000 - 0xe0000000 ( 376 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0163000 (1388 kB)
.text : 0xc0163000 - 0xc0620000 (4852 kB)
.data : 0xc063e000 - 0xc0677f00 ( 232 kB)
<6>SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<0>hello.word-this is mm_init();
<6>Hierarchical RCU implementation.
<6> RCU-based detection of stalled CPUs is disabled.
<6> Verbose stalled-CPUs detection is disabled.
<6>NR_IRQS:246
<7>s3c64xx_init_irq: initialising interrupts
<6>VIC @f4000000: id 0x00041192, vendor 0x41
<6>VIC @f4010000: id 0x00041192, vendor 0x41
<0>hello.word-this is softirq_init();
<7>timer tcon=00580000, tcnt 1b0f0, tcfg 00000201,00010000, usec 00001719
<0>hello.word-this is local_irq_enable();
<0>hello.word-this is kmem_cache_init_late();
Console: colour dummy device 80x30
<6>console [tty0] enabled
<0>hello.word-this is debug_objects_mem_init();
<0>hello.word-this is sched_clock_init();
<6>Calibrating delay loop... <c>530.84 BogoMIPS (lpj=2654208)
<0>hello.word-this is calibrate_delay();
<6>pid_max: default: 32768 minimum: 301
<0>hello.word-this is thread_info_cache_init();
<0>hello.word-this is dbg_late_init();
Mount-cache hash table entries: 512
<0>hello.word-this is vfs_caches_init(totalram_pages);
<0>hello.word-this is signals_init();
<0>hello.word-this is page_writeback_init();
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<0>hello.word-this is check_bugs();
<0>hello.word-this is acpi_early_init();
<6>NET: Registered protocol family 16
<6>s3c64xx_dma_init: Registering DMA channels
<6>s3c64xx_dma_init1: registering DMA 0 (c8808100)
<6>s3c64xx_dma_init1: registering DMA 1 (c8808120)
<6>s3c64xx_dma_init1: registering DMA 2 (c8808140)
<6>s3c64xx_dma_init1: registering DMA 3 (c8808160)
<6>s3c64xx_dma_init1: registering DMA 4 (c8808180)
<6>s3c64xx_dma_init1: registering DMA 5 (c88081a0)
<6>s3c64xx_dma_init1: registering DMA 6 (c88081c0)
<6>s3c64xx_dma_init1: registering DMA 7 (c88081e0)
<6>PL080: IRQ 73, at c8808000
<6>s3c64xx_dma_init1: registering DMA 8 (c880c100)
<6>s3c64xx_dma_init1: registering DMA 9 (c880c120)
<6>s3c64xx_dma_init1: registering DMA 10 (c880c140)
<6>s3c64xx_dma_init1: registering DMA 11 (c880c160)
<6>s3c64xx_dma_init1: registering DMA 12 (c880c180)
<6>s3c64xx_dma_init1: registering DMA 13 (c880c1a0)
<6>s3c64xx_dma_init1: registering DMA 14 (c880c1c0)
<6>s3c64xx_dma_init1: registering DMA 15 (c880c1e0)
<6>PL080: IRQ 74, at c880c000
S3C6410: Initialising architecture
bio: create slab <bio-0> at 0
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>s3c-i2c s3c2440-i2c.0: slave address 0x10
<6>s3c-i2c s3c2440-i2c.0: bus frequency set to 64 KHz
<6>s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
<6>s3c-i2c s3c2440-i2c.1: slave address 0x10
<6>s3c-i2c s3c2440-i2c.1: bus frequency set to 64 KHz
<6>s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
<6>Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>Bluetooth: Core ver 2.15
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>TCP: Hash tables configured (established 4096 bind 4096)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>ashmem: initialized
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<7>yaffs built Mar 17 2011 20:52:45 Installing.
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered (default)
<6>io scheduler cfq registered
<6>s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
<6>s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
<6>s3c6400-uart.2: s3c2410_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C6400/10
<6>s3c6400-uart.3: s3c2410_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C6400/10
<6>loop: module loaded
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>dm9000 Ethernet Driver, V1.31
<6>eth0: dm9000a at c886e000,c8a00004 IRQ 108 MAC: 08:90:00:a0:90:90 (platform d
ata)
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<7>ohci_hcd: block sizes: ed 64 td 64
<7>s3c2410-ohci s3c2410-ohci: s3c2410_start_hc:
<6>s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
<7>drivers/usb/core/inode.c: creating file 'devices'
<7>drivers/usb/core/inode.c: creating file '001'
<6>s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
<6>s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
<7>s3c2410-ohci s3c2410-ohci: created debug files
<7>s3c2410-ohci s3c2410-ohci: fminterval delta -11999
<7>s3c2410-ohci s3c2410-ohci: enabling initreset quirk
<3>s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
<3>ohci_hcd: can't start s3c24xx
<7>s3c2410-ohci s3c2410-ohci: OHCI controller state
<7>s3c2410-ohci s3c2410-ohci: OHCI 0.0, NO legacy support registers
<7>s3c2410-ohci s3c2410-ohci: control 0x000 HCFS=reset CBSR=0
<7>s3c2410-ohci s3c2410-ohci: cmdstatus 0x00000 SOC=0
<7>s3c2410-ohci s3c2410-ohci: intrstatus 0x00000000
<7>s3c2410-ohci s3c2410-ohci: intrenable 0x00000000
<7>s3c2410-ohci s3c2410-ohci: hcca frame #0000
<7>s3c2410-ohci s3c2410-ohci: roothub.a 00000000 POTPGT=0 NDP=0(0)
<7>s3c2410-ohci s3c2410-ohci: roothub.b 00000000 PPCM=0000 DR=0000
<7>s3c2410-ohci s3c2410-ohci: roothub.status 00000000
<3>s3c2410-ohci s3c2410-ohci: startup error -75
<6>s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
<7>s3c2410-ohci s3c2410-ohci: s3c2410_stop_hc:
<4>s3c2410-ohci: probe of s3c2410-ohci failed with error -75
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>USB Serial support registered for generic
<6>usbcore: registered new interface driver usbserial_generic
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for aircable
<6>usbcore: registered new interface driver aircable
<6>USB Serial support registered for ark3116
<6>usbcore: registered new interface driver ark3116
<6>ark3116:v0.6:USB ARK3116 serial/IrDA driver
<6>USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapte
r
<6>usbcore: registered new interface driver belkin
<6>belkin_sa: v1.3:USB Belkin Serial converter driver
<6>USB Serial support registered for ch341-uart
<6>usbcore: registered new interface driver ch341
<6>USB Serial support registered for cp210x
<6>usbcore: registered new interface driver cp210x
<6>cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
<6>USB Serial support registered for Reiner SCT Cyberjack USB card reader
<6>usbcore: registered new interface driver cyberjack
<6>cyberjack: v1.01 Matthias Bruestle
<6>cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
<6>USB Serial support registered for DeLorme Earthmate USB
<6>USB Serial support registered for HID->COM RS232 Adapter
<6>USB Serial support registered for Nokia CA-42 V2 Adapter
<6>usbcore: registered new interface driver cypress
<6>cypress_m8: v1.10:Cypress USB to Serial Driver
<6>USB Serial support registered for debug
<6>usbcore: registered new interface driver debug
<6>USB Serial support registered for Digi 2 port USB adapter
<6>USB Serial support registered for Digi 4 port USB adapter
<6>usbcore: registered new interface driver digi_acceleport
<6>digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter drive
r
<6>USB Serial support registered for Edgeport 2 port adapter
<6>USB Serial support registered for Edgeport 4 port adapter
<6>USB Serial support registered for Edgeport 8 port adapter
<6>USB Serial support registered for EPiC device
<6>usbcore: registered new interface driver io_edgeport
<6>io_edgeport: v2.7:Edgeport USB Serial Driver
<6>USB Serial support registered for Edgeport TI 1 port adapter
<6>USB Serial support registered for Edgeport TI 2 port adapter
<6>usbcore: registered new interface driver io_ti
<6>io_ti: v0.7mode043006:Edgeport USB Serial Driver
<6>USB Serial support registered for empeg
<6>usbcore: registered new interface driver empeg
<6>empeg: v1.3:USB Empeg Mark I/II Driver
<6>USB Serial support registered for FTDI USB Serial Device
<6>usbcore: registered new interface driver ftdi_sio
<6>ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
<6>USB Serial support registered for funsoft
<6>usbcore: registered new interface driver funsoft
<6>USB Serial support registered for Garmin GPS usb/tty
<6>usbcore: registered new interface driver garmin_gps
<6>garmin_gps: v0.33:garmin gps driver
<6>USB Serial support registered for hp4X
<6>usbcore: registered new interface driver hp4X
<6>hp4x: v1.00:HP4x (48/49) Generic Serial driver
<6>USB Serial support registered for PocketPC PDA
<6>usbcore: registered new interface driver ipaq
<6>ipaq: v1.0:USB PocketPC PDA driver
<6>USB Serial support registered for IPWireless converter
<6>usbcore: registered new interface driver ipwtty
<6>ipw: v0.4:IPWireless tty driver
<6>USB Serial support registered for IR Dongle
<6>usbcore: registered new interface driver ir-usb
<6>ir_usb: v0.5:USB IR Dongle driver
<6>USB Serial support registered for iuu_phoenix
<6>usbcore: registered new interface driver iuu_phoenix
<6>iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
<6>USB Serial support registered for Keyspan - (without firmware)
<6>USB Serial support registered for Keyspan 1 port adapter
<6>USB Serial support registered for Keyspan 2 port adapter
<6>USB Serial support registered for Keyspan 4 port adapter
<6>usbcore: registered new interface driver keyspan
<6>keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
<6>USB Serial support registered for Keyspan PDA
<6>USB Serial support registered for Keyspan PDA - (prerenumeration)
<6>USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
<6>usbcore: registered new interface driver keyspan_pda
<6>keyspan_pda: v1.1:USB Keyspan PDA Converter driver
<6>USB Serial support registered for KL5KUSB105D / PalmConnect
<6>usbcore: registered new interface driver kl5kusb105d
<6>kl5kusb105: v0.4:KLSI KL5KUSB105 chipset USB->Serial Converter driver
<6>USB Serial support registered for KOBIL USB smart card terminal
<6>usbcore: registered new interface driver kobil
<6>kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
<6>USB Serial support registered for MCT U232
<6>usbcore: registered new interface driver mct_u232
<6>mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
<6>USB Serial support registered for Moschip 2 port adapter
<6>mos7720: 2.1:Moschip USB Serial Driver
<6>usbcore: registered new interface driver moschip7720
<6>USB Serial support registered for Moschip 7840/7820 USB Serial Driver
<6>mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
<6>usbcore: registered new interface driver mos7840
<6>USB Serial support registered for moto-modem
<6>usbcore: registered new interface driver moto-modem
<6>USB Serial support registered for navman
<6>usbcore: registered new interface driver navman
<6>USB Serial support registered for ZyXEL - omni.net lcd plus usb
<6>usbcore: registered new interface driver omninet
<6>omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
<6>USB Serial support registered for opticon
<6>usbcore: registered new interface driver opticon
<6>USB Serial support registered for GSM modem (1-port)
<6>usbcore: registered new interface driver option
<6>option: v0.7.2:USB Driver for GSM modems
<6>USB Serial support registered for oti6858
<6>usbcore: registered new interface driver oti6858
<6>USB Serial support registered for pl2303
<6>usbcore: registered new interface driver pl2303
<6>pl2303: Prolific PL2303 USB to serial adaptor driver
<6>USB Serial support registered for qcaux
<6>usbcore: registered new interface driver qcaux
<6>USB Serial support registered for Qualcomm USB modem
<6>usbcore: registered new interface driver qcserial
<6>safe_serial: v0.1:USB Safe Encapsulated Serial
<6>USB Serial support registered for safe_serial
<6>usbcore: registered new interface driver safe_serial
<6>USB Serial support registered for siemens_mpi
<6>usbcore: registered new interface driver siemens_mpi
<6>Driver for Siemens USB/MPI adapter
<6>Version 0.1 09/26/2005 Thomas [url=mailto:Hergenhahn@web.de]Hergenhahn@web.de[/url]
http://libnodave.sf.net<6>USB Serial support registered for Sierra USB modem
<6>usbcore: registered new interface driver sierra
<6>sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
<6>USB Serial support registered for SPCP8x5
<6>usbcore: registered new interface driver spcp8x5
<6>spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver
<6>USB Serial support registered for symbol
<6>usbcore: registered new interface driver symbol
<6>USB Serial support registered for TI USB 3410 1 port adapter
<6>USB Serial support registered for TI USB 5052 2 port adapter
<6>usbcore: registered new interface driver ti_usb_3410_5052
<6>ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver
<6>USB Serial support registered for Handspring Visor / Palm OS
<6>USB Serial support registered for Sony Clie 3.5
<6>USB Serial support registered for Sony Clie 5.0
<6>usbcore: registered new interface driver visor
<6>visor: USB HandSpring Visor / Palm OS driver
<6>USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration
)
<6>USB Serial support registered for Connect Tech - WhiteHEAT
<6>usbcore: registered new interface driver whiteheat
<6>whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
<6>USB Serial support registered for vivopay-serial
<6>usbcore: registered new interface driver vivopay-serial
<6>vivopay_serial: v1.0:ViVOpay USB Serial Driver
<6>USB Serial support registered for zio
<6>usbcore: registered new interface driver zio
<6>s3c-hsotg s3c-hsotg: regs c8880000, irq 90
<3>s3c-hsotg s3c-hsotg: Failed to get CSftRst asserted
<6>s3c-hsotg s3c-hsotg: GRXFSIZ=0x00001800, GNPTXFSIZ=0x18001800
<6>s3c-hsotg s3c-hsotg: DCFG=0x00200000, DCTL=0x00000002, DIEPMSK=0000000f
<6>s3c-hsotg s3c-hsotg: GAHBCFG=0x00000000, 0x44=0x00000000
<6>s3c-hsotg s3c-hsotg: GRXFSIZ=0x00000800, GNPTXFSIZ=0x01c00800
<6>s3c-hsotg s3c-hsotg: DPTx[1] FSize=768, StAddr=0x00000f00
<6>s3c-hsotg s3c-hsotg: DPTx[2] FSize=768, StAddr=0x00001200
<6>s3c-hsotg s3c-hsotg: DPTx[3] FSize=768, StAddr=0x00001500
<6>s3c-hsotg s3c-hsotg: DPTx[4] FSize=768, StAddr=0x00001800
<6>s3c-hsotg s3c-hsotg: DPTx[5] FSize=768, StAddr=0x00001b00
<6>s3c-hsotg s3c-hsotg: DPTx[6] FSize=768, StAddr=0x00001e00
<6>s3c-hsotg s3c-hsotg: DPTx[7] FSize=768, StAddr=0x00002100
<6>s3c-hsotg s3c-hsotg: DPTx[8] FSize=768, StAddr=0x00002400
<6>s3c-hsotg s3c-hsotg: DPTx[9] FSize=768, StAddr=0x00002700
<6>s3c-hsotg s3c-hsotg: DPTx[10] FSize=768, StAddr=0x00002a00
<6>s3c-hsotg s3c-hsotg: DPTx[11] FSize=768, StAddr=0x00002d00
<6>s3c-hsotg s3c-hsotg: DPTx[12] FSize=768, StAddr=0x00003000
<6>s3c-hsotg s3c-hsotg: DPTx[13] FSize=768, StAddr=0x00003300
<6>s3c-hsotg s3c-hsotg: DPTx[14] FSize=768, StAddr=0x00003600
<6>s3c-hsotg s3c-hsotg: DPTx[15] FSize=768, StAddr=0x00003900
<6>s3c-hsotg s3c-hsotg: ep0-in: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep0-out: EPCTL=0x00008000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep1-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep1-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep2-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep2-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep3-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep3-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep4-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep4-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep5-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep5-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep6-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep6-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep7-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep7-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep8-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep8-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep9-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x00000000
<6>s3c-hsotg s3c-hsotg: ep9-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep10-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep10-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000
00
<6>s3c-hsotg s3c-hsotg: ep11-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep11-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000
00
<6>s3c-hsotg s3c-hsotg: ep12-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep12-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000
00
<6>s3c-hsotg s3c-hsotg: ep13-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep13-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000
00
<6>s3c-hsotg s3c-hsotg: ep14-in: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x0000000
0
<6>s3c-hsotg s3c-hsotg: ep14-out: EPCTL=0x00000000, SIZ=0x00000000, DMA=0x000000
00
<6>s3c-hsotg s3c-hsotg: DVBUSDIS=0x000017d7, DVBUSPULSE=000005b8
<6>android init
<6>android_probe pdata: c06446a0
<6>android_bind
<7>android_bind_config
<6>android_usb gadget: android_usb ready
<6>s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x00008000
<6>s3c-hsotg s3c-hsotg: DCTL=0x00000002
<6>s3c-hsotg s3c-hsotg: EP0: DIEPCTL0=0x00008000, DOEPCTL0=0x80008000
<6>s3c-hsotg s3c-hsotg: S3C_GINTSTS_USBSusp
<6>s3c-hsotg s3c-hsotg: S3C_GINTSTS_USBSusp
<6>s3c-hsotg s3c-hsotg: bound driver android_usb
<6>f_adb init
<6>android_register_function adb
<6>f_mass_storage init
<6>fsg_probe pdev: c06442b0, pdata: c0644618
<6>android_register_function usb_mass_storage
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>adb_bind_config
<6>mice: PS/2 mouse device common for all mice
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
<6>Linux video capture interface: v2.00
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>Bluetooth: HCILL protocol initialized
<6>Bluetooth: Generic Bluetooth USB driver ver 0.6
<6>usbcore: registered new interface driver btusb
<6>sdhci: Secure Digital Host Controller Interface driver
<6>s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
<6>s3c-hsotg s3c-hsotg: GNPTXSTS=000801c0
<6>sdhci: Copyright(c) Pierre Ossman
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>ALSA device list:
<6> No soundcards found.
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>Bluetooth: L2CAP ver 2.14
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO (Voice Link) ver 0.6
<6>Bluetooth: SCO socket layer initialized
<6>Bluetooth: RFCOMM TTY layer initialized
<6>s3c-hsotg s3c-hsotg: new device is high-speed
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<3>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>Freeing init memory: 1388K
<0>Kernel panic - not syncing: Attempted to kill init![<c0168b14>] (unwind_backtrace+0x0/0xe4) from [<c04a82d8>] (panic+0x68/0xe8)
[<c04a82d8>] (panic+0x68/0xe8) from [<c01806bc>] (do_exit+0x68/0x65c)
[<c01806bc>] (do_exit+0x68/0x65c) from [<c0180fdc>] (do_group_exit+0xb0/0xe4)
[<c0180fdc>] (do_group_exit+0xb0/0xe4) from [<c018b888>] (get_signal_to_deliver+
0x3c4/0x420)
[<c018b888>] (get_signal_to_deliver+0x3c4/0x420) from [<c0166430>] (do_signal+0x
68/0x65c)
[<c0166430>] (do_signal+0x68/0x65c) from [<c0167000>] (do_notify_resume+0x18/0x4
8)
[<c0167000>] (do_notify_resume+0x18/0x48) from [<c0163ef0>] (work_pending+0x1c/0
x20)
<0>Rebooting in 5 seconds..<6>s3c-hsotg s3c-hsotg: s3c_hsotg_irq: USBRst
<6>s3c-hsotg s3c-hsotg: GNPTXSTS=010801c0
<6>s3c-hsotg s3c-hsotg: new device is high-speed
<6>s3c-hsotg s3c-hsotg: new address 1
<6>android_usb gadget: high speed config #1: android
<3>android_usb gadget: common->fsg is NULL in fsg_setup at 606
<3>android_usb gadget: common->fsg is NULL in fsg_setup at 606
<4>s3c-hsotg s3c-hsotg: s3c_hsotg_rx_data: FIFO 8 bytes on ep0 but no req (DxEPC
Tl=0x00028000)
OK
U-Boot 1.1.6 (Dec 31 2010 - 14:07:41) for FriendlyARM MINI6410
CPU: [url=mailto:S3C6410@532MHz]S3C6410@532MHz[/url]
Fclk = 532MHz, Hclk = 133MHz, Pclk = 66MHz, Serial = CLKUART (SYNC Mode
)
Board: MINI6410
DRAM: 128 MB
Flash: 0 kB
NAND: 256 MB
In: serial
Out: serial
Err: serial
MAC: 08:90:90:90:90:90
Hit any key to stop autoboot: 3
[ 此帖被rrrnnnaaa在2011-03-17 22:26重新编辑 ]
