各位；
我使用supervivi 烧写 linux-2.6-32和linux-2.6-38 的 uImage到mini2440后从uboot 启动内核
nand read 0x30008000 0x60000 0x500000;bootm
都出现了
NAND read: device 0 offset 0x60000, size 0x500000
NAND read from offset 6000033fc220c failed 0
5242880 bytes read: ERROR
## Booting kernel from Legacy Image at 30008000 ...
Image Name: tekkaman
Created: 2013-05-31 11:24:24 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2266616 Bytes = 2.2 MB
Load Address: 30008000
Entry Point: 30008040
Verifying Checksum ... Bad Data CRC
ERROR: can't get kernel image!
而我用nfs 命令
nfs 0x300080000 192.169.1.102:/home/wtq/mynfs/uImage;
bootm 0x30008000
系统正常启动
但我用 supervivi 下载 zImage 时没有问题
请问各位大侠 supervivi 是不是不能烧写uImage 到Nand flash?
