借了一块tiny6410开发板，想刷个linux系统，烧写完成后，无法进入系统，打印信息停留在如下的地方，请大家给个意见。谢谢！！
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
one_wire_status: 4
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.0: clock source 2: mmc_bus (42333333 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133000000 Hz)
one_wire_status: 4
s3c-sdhci s3c-sdhci.1: clock source 2: mmc_bus (84666666 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD8GB 7.43 GiB
s3c-rtc s3c64xx-rtc: setting system clock to 2000-01-01 00:26:53 UTC (946686413)
mmcblk0: p1
Freeing init memory: 1408K
yaffs: dev is 32505858 name is "mtdblock2" rw
yaffs: passed flags ""
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c0177c44>] (unwind_backtrace+0x0/0xe4) from [<c05148e4>] (panic+0x58/0x174)
[<c05148e4>] (panic+0x58/0x174) from [<c0189eb0>] (do_exit+0x68/0x5e4)
[<c0189eb0>] (do_exit+0x68/0x5e4) from [<c018a6f0>] (do_group_exit+0x90/0xc4)
[<c018a6f0>] (do_group_exit+0x90/0xc4) from [<c018a734>] (sys_exit_group+0x10/0x18)
one_wire_status: 2
[<c018a734>] (sys_exit_group+0x10/0x18) from [<c01725e0>] (ret_fast_syscall+0x0/0x30)
one_wire_status: 4
