第一个问题：
用的是默认的kernel 和root系统
没有改变
当选择norflash启动时
可以进入supervivi
当选择nandflash时
nec得屏一闪一灭
无法进入
终端不断重复的显示
+---------------------------------------------+_ENDPOINT:3
Setup linux parameters at 0x3000010
| S3C2440A USB Downloader ver R0.03 2004 Jan |and line is: "noinitrd root=/dev/mtdblock2 init
+---------------------------------------------+ecIZE(n+
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3valid USB de
NOW, Booting Linux..
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>.....ufacture ID: 0xec, Chip ID: 0x
VIVI version 0.1.
NOTE: Power off/on or press the reset button for 1 sec)) #0.1.
Could not found stored vivi parame
in order to get a valid USB device address.:09:10 CST 2008. Use default vivi parameters.
MMU
NAND device: Manufacture ID: 0xec, Chip Io
C0"
MACH_TYPE = 782o get a valid U
NOW, Booting Linux......02:09:10 CST 2008DPOINT:
Uncompressing Linux.......vice: Manufacture ID: 0xec
VIVI version 0.1.4 (root@capcross) (gcc version 2.95.3 20010315 (release)) #0.1.xrc +<D
DIVN_UPLL02
Could not found stored vivi parameters
MPLLVal [M:7fh,P:2h,S:1h]-------------+
CLKDIVN:5h
+---------------------------------------------+
|
Setup linux parameters at 0x3000010
| S3C2440A USB Downloader ver R0.03 2004 Jan |and line is: "noinitrd root=/dev/mtdblock2 init
+---------------------------------------------+ sec----------------------------------------+:4
USB: IN_ENDPOINT:1 OUT_ENDPOINT:3a valid USB
NOW, Booting Linux..
FORMAT: <ADDR(DATA):4>+<SIZE(n+10):4>+<DATA:n>+<CS:2>..: Manufacture ID: 0xec, Chi
VIVI version 0.1.4 (roo
NOTE: Power off/on or press the reset button for 1 sec1.is: "noini
Could not found stored vivi para
in order to get a valid USB device address. CST 2008ci
MMU table
MACH_TYPE = 782
NOW, Booting Linux......
Uncompressing Linux...........
VIVI version 0.1.4 (root@capcross) (gcc version 2.95.3 20010315 (release)) #0.1.
4 Fri Sep 12 02:09:10 CST 2008
MMU table base address = 0x33DFC000
Succeed memory mapping.
DIVN_UPLL0
MPLLVal [M:7fh,P:2h,S:1h]
CLKDIVN:5h
----------------------------------------
当断开lcd屏接线后 就可以进入 linux系统
否则就一直显示上面的信息 无法进入系统
第二个问题
usb驱动已经安装
dnw也可以检测到
但下载时进度条只走一点 就停住了
无法下载
这两个问题很棘手
不知道别人有没有遇到过
谢谢
