主题 : 新固件出现的问题 复制链接 | 浏览器收藏 | 打印
级别: 圣骑士
UID: 9690
精华: 0
发帖: 369
金钱: 1955 两
威望: 415 点
综合积分: 738 分
注册时间: 2009-10-10
最后登录: 2017-11-21
楼主  发表于: 2011-07-01 16:58

 新固件出现的问题

ALSA device list:
  #0: MINI6410 (WM9713)
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
s3c-rtc s3c64xx-rtc: setting system clock to 2000-04-04 23:11:00 UTC (
954889860)
Freeing init memory: 1396K
UBIFS error (pid 853): ubifs_get_sb: cannot open "ubi0:FriendlyARM-root",
error -19
mount: mounting ubi0:FriendlyARM-root on /r failed: No such device
1Wire touchscreen OK
/init: line 103: can't open /r/dev/console: no such file
Kernel panic - not syncing: Attempted to kill init!
[<c016a9a4>] (unwind_backtrace+0x0/0xe4) from [<c050aa3c>] (panic+0x68/0x194)
[<c050aa3c>] (panic+0x68/0x194) from [<c01827e4>] (do_exit+0x68/0x664)
[<c01827e4>] (do_exit+0x68/0x664) from [<c018310c>] (do_group_exit+0xb0/0xe4)
[<c018310c>] (do_group_exit+0xb0/0xe4) from [<c0183150>] (sys_exit_group+0x10/
0x18)
[<c0183150>] (sys_exit_group+0x10/0x18) from [<c0165e60>] (ret_fast_syscall+
0x0/0x30)
级别: 圣骑士
UID: 9690
精华: 0
发帖: 369
金钱: 1955 两
威望: 415 点
综合积分: 738 分
注册时间: 2009-10-10
最后登录: 2017-11-21
1楼  发表于: 2011-07-01 17:00
用的是下载下来的superboot,azImage,和rootfs_android-slc.ubi,
Android-CommandLine = root=ubi0:FriendlyARM-root ubi.mtd=2 rootfstype=ubifs  init=/linuxrc console=ttySAC0,115200 androidboot.console=s3c2410_serial0
级别: 圣骑士
UID: 9690
精华: 0
发帖: 369
金钱: 1955 两
威望: 415 点
综合积分: 738 分
注册时间: 2009-10-10
最后登录: 2017-11-21
2楼  发表于: 2011-07-01 17:08
是我的commandline 不对么
root=ubi0:FriendlyARM-root?
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
3楼  发表于: 2011-07-01 17:17
建议你使用新的superboot来代替u-boot,见http://www.aiothome.net/read.php?tid-12717.html
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
4楼  发表于: 2011-07-01 17:18
另外,经过测试,本版本的ROM的并不适合128M内存的6410板,因为2D/3D, CMOS驱动会占用较多的内存
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.
级别: 圣骑士
UID: 9690
精华: 0
发帖: 369
金钱: 1955 两
威望: 415 点
综合积分: 738 分
注册时间: 2009-10-10
最后登录: 2017-11-21
5楼  发表于: 2011-07-01 17:42
256M内存,1G的nand。。。。
自由,自强,共享,共创。
级别: 论坛版主
UID: 12573
精华: 27
发帖: 8838
金钱: 46490 两
威望: 9298 点
综合积分: 18216 分
注册时间: 2010-01-09
最后登录: 2019-07-16
6楼  发表于: 2011-07-01 18:32
可能你烧写的不对,再仔细试试了

另外,又一个新固件今晚可发,增加了3G自动拨号上网的支持
新手如何向我们反馈有效的信息,以便解决问题,见此贴:
http://www.arm9home.net/read.php?tid-14431.html

[注]: 此处签名链接仅为指引方向,而非解答问题本身.