<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[tiny6410下刷机失败问题！急！]]></title>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389]]></link>
 <description><![CDATA[Latest 20 replies of tiny6410下刷机失败问题！急！]]></description>
 <copyright><![CDATA[Copyright(C) ]]></copyright>
 <generator><![CDATA[PHPWind Forums by PHPWind Studio]]></generator>
 <lastBuildDate><![CDATA[Sun, 26 Jul 2026 12:38:49 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images/rss.gif]]></url>
 <title><![CDATA[PHPWind Board]]></title>
 <link><![CDATA[http://aiothome.net]]></link>
 <description><![CDATA[]]></description>
  </image>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[出现了9楼同样的问题]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#375022]]></link>
 <author><![CDATA[王名扬]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Tue, 11 Jul 2017 06:39:49 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[回 1楼(fychen) 的帖子]]></title>
 <description><![CDATA[不知道为什么我的光盘中的superboot用别人的 superboot可以]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#294257]]></link>
 <author><![CDATA[涣涣康王]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 27 Oct 2014 08:09:56 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[回 22楼(fychen) 的帖子]]></title>
 <description><![CDATA[我也遇到同样的问题，就是在9楼的帖子一样的问题，先问你一下，这个问题怎么解决的，能不能给一个详细的步骤]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#207586]]></link>
 <author><![CDATA[koumu]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Wed, 14 Nov 2012 08:08:10 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[回 22楼(fychen) 的帖子]]></title>
 <description><![CDATA[可能你用的xp的缘故，导致文件被覆盖了]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134503]]></link>
 <author><![CDATA[mindee]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 22:34:23 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[看起来就是从SD卡自动拷贝镜像文件到nand flash时出了问题，导致开机时“booting kernel死掉”或“加载文件系统时重启”。用usb拷贝文件到nand flash就ok的。

这个问题算是解决了，谢谢mindee和hacker的回复！]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134500]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 16:38:03 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[终于弄好了 [s:14] 今天晚上USB转串口非常给力，一路usb手动安装，超级终端非常顺畅。usb-mini usb线和dnw工具也没问题。

SD卡里的superboot 就用的superboot-20110727.bin。其他镜像文件也都用的光盘上的老版本。

Superboot没有坏区报告，format直接完成。而且format之后不会返回BIOS主菜单，要重启继续安装bootloader ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134492]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 15:45:40 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[给个链接吧。]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134471]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 14:13:57 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[建议你下载最新软件，你用的太老了，特别是7.20的，可能是有问题的，我们只放出很少一部分，后来很快在论坛提供了更新，大概是8.10，现在当然有更新的]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134462]]></link>
 <author><![CDATA[mindee]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 13:50:26 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[恩，串口线先不管了，至少烧写成功了几次，这个是不是可以排除SD卡、烧录工具SD-flasher和烧录文件superboot-20111114.bin的问题？

现在问题是烧写后启动没有成功过，这个应该都是在nand flash中的代码，和SD卡无关了吧？

你说“可能烧错了文件 ”。现在开发板的硬件信息、“FriendlyARM.ini”文件的内容、烧写的log我都 ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134460]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 13:41:05 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[你的usb转串口线可能不行，建议在代理初购买，他们一般都经过测试验证的。其他地方买的就难说了]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134453]]></link>
 <author><![CDATA[mindee]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 13:03:41 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[烧写后，仍然无法开机，com口打印了如下两行就没反应了：
Load Kernel...
Uncompressing Linux... done, booting the kernel.

开机logo没有显示，应该是booting就失败了。

再重试了几次，又都烧写失败，在
Installing ubifs-image...
file: /images/Linux/rootfs_qtopia_qt4-mlc2.ubi: 139 MB(145752064 Byte)
这里死掉 ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134451]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 12:53:25 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[你好，刚才加上 LowFormat=Yes 试了一下。烧写成功，抓到了log如下。


NAND Low-level formating...
NAND Low-level formatted...

Superboot-6410
Ver: 1144
CPU: S3C6410 533MHz
RAM: 256MB
NAND: 2GB(MLC2) ID:ECD58472
Touch Device: 1-wire
LCD Type: N43(Auto)


Superboot-6410
Ver: 1144
CPU: S3C6410 533MHz
RA ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134447]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 12:35:37 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[在 VerifyNandWrite=No 这一行下面加上 LowFormat=Yes 重新烧写试试]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134377]]></link>
 <author><![CDATA[hacker]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 08:07:57 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[建议使用电脑自带的串口 
------------------------------------ 
这个太没建设性了吧，现在哪个笔记本带com口。论坛上大多数人也是用usb转串口线吧。]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134284]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 02:13:15 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[并且你可能烧错了文件 
并下载使用最新光盘软件 
---------------------------------- 
你看了log吗？到底出错原因是什么。
 烧写的文件都是友善之臂配套光盘上的，修改时间都是今年7月，请问哪个文件是错的，或者你告诉我在哪下最新的。]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134281]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Mon, 21 Nov 2011 02:07:50 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[你的usb转串口有问题
并且你可能烧错了文件

建议使用电脑自带的串口，并下载使用最新光盘软件]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134254]]></link>
 <author><![CDATA[mindee]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Sun, 20 Nov 2011 21:14:20 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[有没有答复啊？
[color=#0000ff]UBIFS: recovery needed
UBIFS error (pid 913): ubifs_recover_leb: corrupt empty space LEB 5:0, corruption starts at 788993
UBIFS error (pid 913): ubifs_scanned_corruption: corruption at LEB 5:788993
UBIFS error (pid 913): ubifs_recover_leb: LEB 5 scanning failed
mount: ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134249]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Sun, 20 Nov 2011 16:14:21 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[使用最新的superboot，配置相应改为：
#This line cannot be removed. by FriendlyARM([url=http://www.arm9.net]www.arm9.net[/url])
LCD-Mode = Yes
LCD-Type = N43
CheckOneButton=No
Action=install
OS= Linux
VerifyNandWrite=No
StatusType = Beeper| LED
#################### Linux #####################
Linux- ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134211]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Sun, 20 Nov 2011 13:23:31 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[使用最新的superboot烧写系统时，串口会同时输出一些信息，它是什么？贴上来看看。]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134202]]></link>
 <author><![CDATA[mindee]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Sun, 20 Nov 2011 12:53:42 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[1.烧写的配置文件内容是什么？
--------------------------------------------------------
就是光盘B的默认FriendlyARM.ini，和你签名网页上的完全一样。再给您贴一遍吧，
以下是配置文件内容：
#This line cannot be removed. by FriendlyARM([url]www.arm9.net[/url])

LCD-Mode = Yes
LCD-Type = N43

CheckOneButton ..]]></description>
 <link><![CDATA[http://aiothome.net/read.php?tid=16389#134198]]></link>
 <author><![CDATA[fychen]]></author>
 <category><![CDATA[友善之臂官方客服中心]]></category>
 <pubdate><![CDATA[Sun, 20 Nov 2011 12:47:11 +0000]]></pubdate>
</item>
</channel></rss>