我尝试将友善官方提供移植代码编译后挂载，android内核为啥不能启动nfs连接呢（启动消息如下，就不动了）？我以前移植别的2.6.34版本都可以挂载成功的。
<6>NET: Registered protocol family 17
NET: Registered protocol family 17
<6>RPC: Registered udp transport module.
RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
RPC: Registered tcp transport module.
<6>s3c2410-rtc s3c2410-rtc: setting system clock to 2005-08-07 00:46:20 UTC (1123375580)
s3c2410-rtc s3c2410-rtc: setting system clock to 2005-08-07 00:46:20 UTC (1123375580)
<6>s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
s3c2440-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
<6>s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
<6>s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
<6>s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
s3c2440-sdi s3c2440-sdi: running at 198kHz (requested: 197kHz).
<6>s3c2440-sdi s3c2440-sdi: powered down.
s3c2440-sdi s3c2440-sdi: powered down.
<6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
IP-Config: Complete:IP-Config: Complete:
device=eth0
device=eth0, addr=192.168.0.10, addr=192.168.0.10, mask=255.255.255.0, mask=255.255.255.0, gw=192.168.0.1, gw=192.168.0.1,
host=MINI2440, domain=, nis-domain=arm9.net,
host=MINI2440, domain=, nis-domain=arm9.net,
bootserver=192.168.0.6,
bootserver=192.168.0.6, rootserver=192.168.0.6, rootserver=192.168.0.6, rootpath=, rootpath=
